6 hardware monitor, Power on by ps/2 kb/ms [disabled, Power on by usb [disabled – Asus M2N 1394 User Manual
Page 71: Power on by rtc alarm [disabled
ASUS MN 1394
-31
Power On By PS/2 KB/MS [Disabled]
Allows you to use specific keys on the keyboard or mouse activities to turn on the
system. This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead. Configuration options: [Disabled] [Enabled]
Power On By USB [Disabled]
When set to [Enabled], this parameter allows you to turn on the system through a
USB device. This feature requires an ATX power supply that provides at least 1A
on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is
set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute,
and RTC Alarm Second appear with set values.
Configuration options: [Disabled] [Enabled]
2.5.6
Hardware Monitor
Hardware Monitor
CPU Temperature
[44ºC/111ºF]
MB Temperature
[37ºC/98.5ºF]
CPU Fan Speed (RPM)
[3308RPM]
Chassis Fan1 Speed
[N/A]
CPU Q-Fan Control [Enabled]
VCORE Voltage
[ 1.392V]
3.3V Voltage
[ 3.296V]
5V Voltage
[ 4.892V]
12V Voltage
[11.126V]
CPU Temperature [xxxºC/xxxºF]
MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the motherboard
and CPU temperatures. Select Ignored if you do not wish to display the detected
temperatures.
CPU Fan Speed (RPM) [xxxxRPM] or [N/A] or [Ignored]
The onboard hardware monitor automatically detects and displays the CPU
fan speed in rotations per minute (RPM). If the fan is not connected to the
motherboard, the field shows N/A. Select Ignored if you do not wish to display the
detected speed.