Asus M2N 1394 - Manual (Page 30)

1-20 Chapter 1: Product introduction
2. USB device wake-up (3-pin PS2_USB_PWR)
This jumper allows you to enable or disable the keyboard wake-up feature. Set this
jumper to pins -3 (+5VSB) to wake up the computer when you press a key on the
keyboard (the default is the Space Bar). This feature requires an ATX power supply
that can supply at least 500 mA on the +5VSB lead, and a corresponding setting in
the BIOS.
M2N 1394
®
M2N 1394 USB device wake-up
1
3
+5V
(Default)
+5VSB
USBPW134
USBPW5678
+5V
(Default)
+5VSB
4 6 4
1
3
+5V
(Default)
+5VSB
USBPW910