Asus Crosshair III Formula - Manual (Page 106)

3-32 Chapter 3: BIOS setup
CPU LED Selection [CPU]
Allows you to switch the onboard CPU LED display between CPU voltage
[CPU], CPU/NB voltage [CPU/NB] and CPU VDDA voltage [CPU VDDA].
Configuration options: [CPU] [CPU/NB] [CPU VDDA]
NB LED Selection [NB]
Allows you to switch the onboard northbridge LED display.
Configuration options: [NB] [NB 1.8V]
SB LED Selection [SB]
Allows you to switch the onboard southbridge LED display.
Configuration options: [SB] [HT]
�.5.7 iROG Configuration
iROG Timer Keeper [Last State]
Allows you to set the iROG Time Keeper operation mode.
Configuration options: [Last State] [Disabled] [Enabled]
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
iROG Timer Keeper
System will record
using time every 1
minute
←→ Select Screen
↑↓ Select Item
F1 General Help
F10 Save and Exit
ESC Exit
iROG Configuration
iROG ID_Number Information
iROG BC_Number: A4
iROG_1 ID_Number: 21
iROG_2 ID_Number: 2
iROG Timer Keeper [Last State]
Current Operation time:
Total Operation time: