9 cpu/nb frequency [auto, 10 ht link speed [auto, Dram controller configuration – Asus Crosshair III Formula User Manual
Page 85: Bank interleaving [auto, Channel interleaving [auto, Enable clock to all dimms [disabled, Memclk tristate c3/atlvid [disabled
ROG Crosshair III Formula
3-11
3.3.9
CPU/NB Frequency [Auto]
Sets the ratio between northbridge (in CPU) and the FSB frequency.
Configuration options: [Auto] [800MHz] [1000MHz] [1200MHz]—[2000MHz]
3.3.10 HT Link Speed [Auto]
Allows you to set the HyperTransport link speed.
Configuration options: [Auto] [200MHz] [400MHz]—[2400MHz] [2000MHz]
�.�.�� DRAM Controller configuration
This item appears only when you set Ai Overclock Tuner to [Manual] or
[CPU Level Up]
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
BIOS SETUP UTILITY
Extreme Tweaker
Enable Bank
Interleaving
←→
Select Screen
↑↓
Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
DRAM Controller configuration
Bank Interleaving
[Auto]
Channel Interleaving
[XOR of Address bit]
Enable Clock to All DIMMs
[Disabled]
MemClk Tristate C3/ATLVID
[Disabled]
Memory Hole Remapping
[Enabled]
DCT Unganged Mode
[Auto]
Power Down Enable
[Disabled]
DCQ maximum bypass counter
[Auto]
Bank Swizzle Mode
[Enabled]
Bank Interleaving [Auto]
[Enabled]
Enables the bank memory interleaving.
[Disabled]
Disables this function.
Channel Interleaving [Auto]
Enables or disables the channel memory interleaving.
Configuration options: [Disabled] [Address bits 6] [Address bits 12]
[XOR of Address bits [20:16, 6]] [XOR of Address bits [20:16, 9]]
Enable Clock to All DIMMs [Disabled]
Allows you to enable unused clocks to DIMMs that are not populated.
Configuration options: [Disabled] [Enabled]
MemClk Tristate C3/ATLVID [Disabled]
[Enabled]
Enables MemClk Tri-Stating during C3 and Alt VID
[Disabled]
Disables this function.