Asus Crosshair III Formula - Manual (Page 114)

3-40 Chapter 3: BIOS setup
�.7.2 Boot Settings Configuration
Quick Boot [Enabled]
Allows you to enable or disable the Quick Boot function.
[Disabled]
When set to [Disabled], BIOS performs all the POST items.
[Enabled] When set to [Enabled], BIOS skips some power on self tests
(POST) while booting to decrease the time needed to boot the
system.
Full Screen Logo [Enabled]
This allows you to enable or disable the full screen logo display feature.
[Enabled]
Enables the full screen logo display feature.
[Disabled] Disables the full screen logo display feature.
Set this item to [Enabled] to use the ASUS MyLogo3™ feature.
AddOn ROM Display Mode [Force BIOS]
Sets the display mode for option ROM.
[Force BIOS]
[Keep Current] .
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock.
[On]
Sets the power-on state of the NumLock to [On].
[Off] Sets the power-on state of the NumLock to [Off].
Wait for ‘F�’ If Error [Enabled]
When set to [Enabled], the system waits for the key to be pressed when error
occurs.
Hit ‘DEL’ Message Display [Enabled]
When set to [Enabled], the system displays the message “Press DEL to run Setup”
during POST.
BIOS SETUP UTILITY
Boot
Boot Settings Configuration
Quick Boot [Enabled]
Full Screen Logo [Enabled]
AddOn ROM Display Mode [Force BIOS]
Bootup Num-Lock [On]
Wait for ‘F1’ if Error [Enabled]
Hit ‘DEL’ Message Display [Enabled]
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.