Asus MES-VM - Manual (Page 57)

ASUS MES-VM User’s Manual 57
4. BIOS SETUP
4. BIOS SETUP
Boot Sequence
The Boot menu allows you to select among the three possible boot devices
listed using the up and down arrow keys. By using the <+> or
key, you can promote devices and by using the <-> key, you can demote
devices. Promotion or demotion of devices alters the priority which the
system uses to search for a boot device on system power up. Configuration
options: [Removable Devices] [IDE Hard Drive] [SCSI Boot Device] [Other
Boot Device]
Removable Device Select [Legacy Floppy]
Configuration options: [Legacy Floppy] [LS120] [ZIP-100] [ATAPI MO]
IDE Hard Drive Select
This field allows you to select the IDE hard disk drive included in the boot
sequence. Pressing [Enter] will show the product IDs of all your connected
IDE hard disk drives.
Other Boot Device Select [ATAPI CD-ROM Drive]
Configuration options: [ATAPI CD-ROM Drive] [Network]
Plug & Play O/S [No]
This field allows you to use a Plug-and-Play (PnP) operating system to
configure the PCI bus slots instead of using the BIOS. Thus interrupts may
be reassigned by the OS when [Yes] is selected. When a non-PnP OS is
installed or to prevent reassigning of interrupt settings, select the default
setting of [No]. Configuration options: [No] [Yes]
4.6 Boot Menu
Boot Menu