Asus MES-VM - Manual (Page 14)

14 ASUS MES-VM User’s Manual
Motherboard Settings
3. H/W SETUP
3. HARDWARE SETUP
3.3 Hardware Setup Procedure
Before using your computer, you must complete the following steps:
Check Motherboard Settings
Install Memory Modules
Install the Central Processing Unit (CPU)
Install Expansion Cards
Connect Ribbon Cables, Panel Wires, and Power Supply
3.4 Motherboard Settings
This section explains in detail how to change your motherboard’s function settings
through the use of switches and/or jumpers.
WARNING! Computer motherboards and expansion cards contain very delicate
Integrated Circuit (IC) chips. To protect them against damage from static electric-
ity, you should follow some precautions whenever you work on your computer.
1. Unplug your computer when working on the inside.
2. Use a grounded wrist strap before handling computer components. If you do
not have one, touch both of your hands to a safely grounded object or to a metal
object, such as the power supply case.
3. Hold components by the edges and try not to touch the IC chips, leads or con-
nectors, or other components.
4. Place components on a grounded antistatic pad or on the bag that came with the
component whenever the components are separated from the system.
1. Video & Audio Settings (VEN_DIS & AUDIOEN)
The built-in AGP VGA and the onboard 32-bit PCI audio may be enabled or
disabled using these jumpers.
Setting VEN_DIS Setting AUDIOEN
Enable [2-3] (default) Enable [1-2] (default)
Disable [1-2] Disable [2-3]
Disable
AUDIOEN
Enable
(Default)
AUDIOEN
3
2
1 3
2
1
MES-VM Video & Audio Settings
Disable
VEN_DIS
Enable
(Default)
3
2
1 3
2
1
VEN_DIS