Hardware setup, 2 layout contents – Asus MES-VM User Manual
Page 13
ASUS MES-VM User’s Manual
13
3. HARDWARE SETUP
Layout Contents
3. H/W SETUP
3.2 Layout Contents
Motherboard Settings
1) VEN_DIS/AUDIOEN
p. 14 Video & Audio Settings (Enable/Disable)
2) FS0, FS1, FS2, FS3
p. 15 CPU External Clock (BUS) Frequency Selector
3) BF0, BF1, BF2, BF3
p. 15 CPU:BUS Frequency Multiple
Expansion Slots
1) DIMM1, DIMM2
p. 16 168-Pin DIMM Memory Support
2) Socket 370
p. 18 Central Processing Unit (CPU) Socket
3) SLOT1
p. 19 16-bit ISA Bus Expansion Slots
*
4) PCI1, PCI2, PCI3
p. 19 32-bit PCI Bus Expansion Slots
Connectors
1) PS2KBMS
p. 21 PS/2 Mouse Connector (6-pin female)
2) PS2KBMS
p. 21 PS/2 Keyboard Connector (6-pin female)
3) USB
p. 22 Universal Serial BUS Ports 1 & 2 (Two 4-pin female)
4) PRINTER
p. 22 Parallel Port Connector (25-pin female)
5) COM1
p. 22 Serial Port COM1 Connector (9-pin male)
6) VGA
p. 23 Monitor (VGA) Output Connector (15-pin female)
7) GAME_AUDIO
p. 23 Joystick/Midi Connector (15-pin female) (optional)
8) GAME_AUDIO
p. 23 Audio Port Connectors (Three 1/8” female) (optional)
9) PRIMARY/SECONDARY IDE p. 24 Primary/Secondary IDE Connectors (Two 40-1 pins)
10) FLOPPY
p. 24 Floppy Disk Drive Connector (34-1pins)
11) WOL_CON
p. 25 Wake-On-LAN Header (3 pins)
12) CHA_FAN, CPU_FAN
p. 25 Chassis and CPU Fan Connectors (Two 3 pins)
13) IR
p. 26 IrDA-Compliant Infrared Module Connector (5 pins)
14) MODEM/CD_IN/CDROM
p. 26 Internal Audio Connectors (Three 4-pin)
15) SPEAKER (PANEL)
p. 28 System Warning Speaker Connector (4 pins)
16) SMI (PANEL)
p. 28 SMI Switch Lead (2 pins)
17) KEYLOCK (PANEL)
p. 28 Keyboard Lock Switch Lead (2 pins)
18) MSG.LED (PANEL)
p. 28 System Message LED (2 pins)
19) RESET (PANEL)
p. 29 Reset Switch Lead (2 pins)
20) PWR.LED (PANEL)
p. 29 System Power LED Lead (3-1 pins)
21) IDELED (PANEL)
p. 29 IDE LED Activity Light (2 pins)
22) PWR.SW (PANEL)
p. 29 ATX Power & Soft-Off Switch Lead (2 pins)
23) ATXPWR
p. 29 ATX Power Supply Connector (20 pins)
*
The onboard hardware monitor uses the address 290H-297H so legacy ISA cards must not
use this address; otherwise, conflicts will occur.