Asus Z87-PLUS - Manual (Page 56)

1-40 Chapter 1: Product introduction
Chapter 1
• For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a
minimum power of 350 W.
• DO NOT forget to connect the 4-pin/8-pin EATX12 V power plug. Otherwise, the
system will not boot.
• We recommend that you use a PSU with a higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
• If you want to use two or more high-end PCI Express x16 cards, use a PSU with
1000W power or above to ensure the system stability.
• If you are uncertain about the minimum power supply requirement for your system,
refer to the Recommended Power Supply Wattage Calculator at http://support.asus.
com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.
�. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
Model Wattage
Great Wall BTX-500GT 400
ANTEC CP-1000 1000
Seasonic SS-1250XM 1250
Seasonic SS-1000XP 1000
ROSEWILL RBR1000-M 1000
LEPA G1600-MA 1600
THERMALTAKE
TOUGHPOWER1500A
1500
Antec EA-650 EarthWatts
Green
650
SeaSonic S12 II SS-330GB
330W
330
Thermaltake toughpower
TPX775
775
ZEST-ZE-850EZ 850
GoldenField ATX-S395 350
OCZ-OCZ550FTY 550
Delta GPS-300AB 300
ENERTRONIX-EN-300 300
Seventeam ST-550P-AD 550
SHARKOON SHA-R600M 600
Corsair CMPSU-850AX 850
Silverstone SST-ST1500 1500
Geil TTB800G 800
DELUX-DLP-650PG 450
HAMER MIT750 750
ENERMAX MAXREVO 1300
Segotep SG-400PYJ 400
Centurystar ST-330 320