Asus Vintage - Manual (Page 79)

79 ASUS Vintage-S800 barebone system
5.5.6 Hardware Monitor
Hardware Monitor
CPU Temperature [28.5°C/83°F]
MB Temperature [28°C/82°F]
CPU Fan Speed [2934RPM]
Chassis Fan Speed [N/A]
Q-Fan Control [Enabled]
Q-Fan Control Temperature [45 Degrees]
Q-Fan Control Tolerance [+-3]
VCORE Voltage [1.520V]
3.3V Voltage [3.344V]
5V Voltage [5.053V]
12V Voltage [11.904V]
Chassis Intrude [Disabled]
CPU Temperature [xxx°C/xxx°F]
MB Temperature [xxx°C/xxx°F]
The onboard hardware monitor automatically detects and displays the
CPU and motherboard temperatures.
CPU Fan Speed [xxxxRPM] or [N/A]
Chassis Fan Speed [xxxxRPM] or [N/A]
The onboard hardware monitor automatically detects and displays the
CPU and chassis fan speeds in rotations per minute (RPM). If any of the
fans is not connected to the motherboard, the specific field shows N/A.
Q-Fan Control [Enabled]
Allows you to enable or disable the ASUS Q-Fan feature that smartly
adjusts the fan speeds for more efficient system operation. When this field
is set to [Enabled], the Q-Fan Control Temperature and Q-Fan Control
Tolerance items appear to allow selection of the appropriate values.
Configuration options: [Disabled] [Enabled]
VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators.
If any of the monitored items is out of range, the following error message
appears: “Hardware Monitor found an error. Enter Power setup menu for
details”. You will then be prompted to “Press F1 to continue or DEL to
enter SETUP”.