Asus Vintage - Manual (Page 19)

ASUS Vintage-S800 barebone system 19
2.3 Removing the side plate and front cover
The system has two chassis side plates, each one secured by two screws
located on the rear panel.
To remove the chassis side plate:
1. Turn each screw
counterclockwise to release
the side cover. Set the screws
aside.
2. Slide the side panel for about
half an inch toward the rear
until it disengages from the
chassis.
Remove only the left side
plate.
3. Release the side lock tabs
from the steel railing.
Screw
Side lock tab
Steel railing