Asus Vintage - Manual (Page 75)

75 ASUS Vintage-S800 barebone system
PCI IDE Bus Master [Enabled]
When set to [Enabled], the BIOS uses PCI bus mastering for reading/
writing to IDE drives. Configuration options: [Enabled] [Disabled]
IRQ-xx assigned to [PCI Device]
When set to [PCI Device], the specific IRQ is free for use of PCI/PnP
devices. When set to [Reserved], the IRQ is reserved for legacy ISA
devices. Configuration options: [PCI Device] [Reserved]
5.4.6 USB Configuration
The items in this menu allows you to change the USB-related features.
Select an item then press to display the configuration options.
Onboard SiS USB1.1 Device [Enabled]
Onboard SiS USB2.0 Device [Enabled]
USB Configuration
Module Version - 2.23.2-9.4
USB Devices Enabled: None
Legacy USB Support [Auto]
USB 2.0 Controller Mode [FullSpeed]
Stop EHCI HC in OHCI handover [Enabled]
to enable or
disable.
Onboard SiS USB1.1 Device [Enabled]
Enables or disables the onboard SiS USB1.1 device.
Configuration options: [Enabled] [Disabled]
Onboard SiS USB2.0 Device [Enabled]
Enables or disables the onboard SiS USB2.0 device.
Configuration options: [Enabled] [Disabled]
Legacy USB Support[Auto]
Allows you to enable or disable support for legacy USB devices. Setting to
Auto allows the system to detect the presence of USB devices at startup. If
detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled. Configuration options:
[Disabled] [Enabled] [Auto]