2 bios setup program – Asus P4G800-V User Manual
Page 37
ASUS P4G800-V motherboard user guide
2-5
2.2
BIOS Setup program
This motherboard supports a programmable firmware hub (FWH) that you can
update using the provided utility described in section
“2.1 Managing and updating
your BIOS.”
Use the BIOS Setup program when you are installing a motherboard, reconfiguring
your system, or prompted to “Run Setup”. This section explains how to configure
your system using this utility.
Even if you are not prompted to use the Setup program, you may want to change
the configuration of your computer in the future. For example, you may want to
enable the security password feature or change the power management settings.
This requires you to reconfigure your system using the BIOS Setup program so
that the computer can recognize these changes and record them in the CMOS
RAM of the firmware hub.
The firmware hub on the motherboard stores the Setup utility. When you start up
the computer, the system provides you with the opportunity to run this program.
Press
Otherwise, POST continues with its test routines.
If you wish to enter Setup after POST, restart the system by pressing
also restart by turning the system off and then back on. Do this last option only if
the first two failed.
The Setup program is designed to make it as easy to use as possible. It is a menu-
driven program, which means you can scroll through the various sub-menus and
make your selections from the available options using the navigation keys.
The BIOS setup screens shown in this chapter are for reference purposes only,
and may not exactly match what you see on your screen.
Visit the ASUS website (www.asus.com) to download the latest product and
BIOS information.
If the system becomes unstable after changing any BIOS settings, load the
default settings to ensure system stability. Select the Load Default Settings
item under the Exit Menu. See section “2.7 Exit Menu.”