Asus AAM6010EV-M - Manual (Page 46)

AAM6010EV-M ADSL Combo Router User’s Manual
46
Figure B.1. Using the ping Utility
If the target computer cannot be located, you will receive the message “Request timed out.”
Using the ping command, you can test whether the path to the AAM6010EV-M is working (using the
preconfigured default LAN IP address 192.168.1.1) or another address you assigned.
You can also test whether access to the Internet is working by typing an external address, such as that for
www.yahoo.com (216.115.108.243). If you do not know the IP address of a particular Internet location, you
can use the nslookup command, as explained in the following section.
From most other IP-enabled operating systems, you can execute the same command at a command
prompt or through a system administration utility.
B.1.2 nslookup
You can use the nslookup command to determine the IP address associated with an Internet site name.
You specify the common name, and the nslookup command looks up the name on your DNS server
(usually located with your ISP). If that name is not an entry in your ISP’s DNS table, the request is then
referred to another higher-level server, and so on, until the entry is found. The server then returns the
associated IP address.
On Windows-based computers, you can execute the nslookup command from the Start menu. Click the
Start button, and then click Run. In the Open text box, type the following:
nslookup
Click . A Command Prompt window displays with a bracket prompt (>). At the prompt, type
the name of the Internet address you are interested in, such as www.absnews.com.
The window will display the associate IP address, if known, as shown in Figure B.2.