Asus AAM6010EV-M - Manual (Page 12)

AAM6010EV-M ADSL Combo Router User’s Manual
12
Figure 3.1 Overview of Hardware Connections
You should verify that its LEDs are illuminated as shown in Table 3.1
Table 3.1 LED Indicators
This LED: ...should be:
POWER Solid green to indicate that the device is turned on. If this light
is not on, check if the power adapter is attached to
AAM6000EV-M and if it is plugged into a power source.
STATUS Solid green to indicate that the device can communicate with
your ISP via ADSL or flashing when the device is trying to
connect to your ISP.
LINE Flashing when the device is sending or receiving data over
the ADSL connection.
PC Solid green to indicate that the device can communicate with
your PC via Ethernet or flashing when the device is sending
or receiving data over Ethernet.
USB Solid green to indicate that the device can communicate with
your PC via USB or flashing when the device is sending or
receiving data over USB.
If the LEDs illuminate as expected, AAM6000EV-M hardware is working properly.
3.2 Configuring Your Computers
If you use Ethernet cable to connect your AAM6000EV-M and PC, you don’t need any specific driver
installation and you can skip this section 3.2.1. But if you use USB cable under Windows operation system,