Asus AAM6010EV-M User Manual
Page 17
AAM6010EV-M ADSL Combo Router User’s Manual
You may be prompted to install files from your Windows Me installation CD or other media. Follow
the instructions to install the files.
8. If prompted, click
to restart your computer with the new settings.
9. After restarting your PC, double-click the Network and Dial-up Connections icon in the
Control Panel.
10. In Network and Dial-up Connections window, right-click the Network icon, and then select
Properties.
11. In the Network Properties dialog box, select TCP/IP, and then click
.
12. In the TCP/IP Settings dialog box, click the radio button labeled Use the following IP
address and type 192.168.1.x and 255.255.255.0 in the IP address field and Subnet Mask
field, respectively.
13. Click
twice to confirm and save your changes, and then close the Control Panel.
3.2.5
Windows® 95, 98 PCs:
1. In the Windows task bar, click the Start button, point to Settings, and then click Control
Panel.
2. Double-click
the
Network icon.
The Network dialog box displays with a list of currently installed network components. If the list
includes TCP/IP, the protocol has already been enabled. Please skip to step 9 directly.
3. If
TCP/IP does not display as an installed component, click
. Then Select
Network Component Type dialog box will display.
4. Select
Protocol, and then click
.
The Select Network Protocol dialog box displays.
5. Click
on
Microsoft in the Manufacturers list box, and then click TCP/IP in the Network
Protocols list box.
6. Click
to return to the Network dialog box, and then click
again.
You may be prompted to install files from your Windows 95/98 installation CD. Follow the
instructions to install the files.
7. Click
to restart the PC and complete the TCP/IP installation.
8. After restarting your PC, open the Control Panel window, and then click the Network icon.
9. Select the network component labeled TCP/IP, and then click
.
If you have multiple TCP/IP listings, select the listing associated with your network card or adapter.
10. In the TCP/IP Properties dialog box, click the IP Address tab.
11. Click the radio button labeled Use the following IP address and type 192.168.1.x and
255.255.255.0 in the IP address field and Subnet Mask field, respectively.
12. Click
twice to confirm and save your changes. You will be prompted to restart
Windows. Please click
and restart your PC again.
3.2.6
Windows® NT 4.0 workstations:
1. In the Windows NT task bar, click the Start button, point to Settings, and then click Control
Panel.