Asus A8N-VM CSM/NBP User Manual

Page 67

A S U S A 8 N - V M / N B P

2 - 2 7

2.5.5

APM Configuration

Power Button Mode [On/Off]

Allows the system to go into On/Off mode or suspend mode when the
power button is pressed. Configuration options: [On/Off] [Suspend]

Resume On PME# [Disabled]

When set to [Enabled], the system enables the PME to generate a wake
event while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]

Resume On Ring [Disabled]

When set to [Enabled], the system enables the RI to generate a wake
event while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]

Resume On LAN(MAC) [Disabled]

When set to [Enabled], this parameter allows you to turn on the system
through a PCI LAN or modem card. This feature requires an ATX power
supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]

Resume On RTC Alarm [Disabled]

Allows you to enable or disable RTC to generate a wake event. When this
item is set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC
Alarm Minute, and RTC Alarm Second appear with set values.
Configuration options: [Disabled] [Enabled]

BIOS SETUP UTILITY

Power

Power Button Mode

[On/Off]

Resume On PME#

[Disabled]

Resume On Ring

[Disabled]

Resume On LAN(MAC)

[Disabled]

Resume On RTC Alarm

[Disabled]

Resume On PS/2 Keyboard

[Disabled]

Resume On PS/2 Mouse

[Disabled]

Restore on AC Power Loss

[Last State]

Go into On/Off or
Suspend when Power
button is pressed.

2.5.4

ACPI APIC Support [Enabled]

Allows you to enable or disable the Advanced Configuration and Power
Interface (ACPI) support in the Advanced Programmable Interrupt
Controller (APIC). When set to Enabled, the ACPI APIC table pointer is
included in the RSDT pointer list. Configuration options: [Disabled]
[Enabled]