Asus A8N-VM CSM/NBP - Manual (Page 63)

A S U S A 8 N - V M / N B P A S U S A 8 N - V M / N B P A S U S A 8 N - V M / N B P A S U S A 8 N - V M / N B P A S U S A 8 N - V M / N B P 2 - 2 3 2 - 2 3 2 - 2 3 2 - 2 3 2 - 2 3
2.4.5 2.4.5 2.4.5 2.4.5 2.4.5 PCI PnP PCI PnP PCI PnP PCI PnP PCI PnP
The PCI PnP menu items allow you to change the advanced settings for
PCI/PnP devices. The menu includes setting IRQ and DMA channel resources
for either PCI/PnP or legacy ISA devices, and setting the memory size block
for legacy ISA devices.
Take caution when changing the settings of the PCI PnP menu items.
Incorrect field values can cause the system to malfunction.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Clear NVRAM [No]
Plug And Play O/S [No]
PCI Latency Timer [64]
Allocate IRQ to PCI VGA [Yes]
Palette Snooping [Disabled]
PCI IDE BusMaster [Enabled]
OffBoard PCI/ISA IDE Card [Auto]
IRQ-3 assigned to [PCI Device]
IRQ-4 assigned to [PCI Device]
IRQ-5 assigned to [PCI Device]
IRQ-7 assigned to [PCI Device]
IRQ-9 assigned to [PCI Device]
IRQ-10 assigned to [PCI Device]
IRQ-11 assigned to [PCI Device]
NO: Lets the BIOS
configure all the
devices in the system.
YES: Lets the
operating system
configure Plug and
Play (PnP) devices not
required for boot if
your system has a Plug
and Play operating
system.
OnBoard LAN Boot ROM [Disabled]
Allows you to enable or disable the onboard LAN boot ROM.
Configuration options: [Disabled] [Enabled]
1394 [Enabled] 1394 [Enabled] 1394 [Enabled] 1394 [Enabled] 1394 [Enabled]
Allows you to enable or disable 1394.
Configuration options: [Disabled] [Enabled]
PCI Clock Detect [Enabled] PCI Clock Detect [Enabled] PCI Clock Detect [Enabled] PCI Clock Detect [Enabled] PCI Clock Detect [Enabled]
Allows you to enable or auto the PCI Clock Detect.
Configuration options: [Auto] [Enabled]
Clear NVRAM [No] Clear NVRAM [No] Clear NVRAM [No] Clear NVRAM [No] Clear NVRAM [No]
Plug And Play O/S [No] Plug And Play O/S [No] Plug And Play O/S [No] Plug And Play O/S [No] Plug And Play O/S [No]
When set to [No], BIOS configures all the devices in the system. When set
to [Yes] and if you install a Plug and Play operating system, the operating
system configures the Plug and Play devices not required for boot.
Configuration options: [No] [Yes]