Asus M2N-VM DVI - Manual (Page 76)

2-30 Chapter 2: BIOS setup
Hyper Transport Configuration
The sub-menu allows you to change the Hyper Transport settings.
SB.to.K8(CPU).Freq.Auto.[Disabled]
Enables or disables the CPU to automatically adjust Hyper Transport frequency.
Configuration options: [Disabled] [Enabled]
SB.to.K8(CPU).Frequency.[1000.MHz]
Allows you to set the Hyper Transport frequency. This item appears when you set
the MCP55(SB) to K8(CPU) Freq Auto to Disabled.
Configuration options: [200 MHz] [400 MHz] [800 MHz] [1000 MHz].
SB.to.K8(CPU).LinkWidth.[16. .16. ]
Sets the Hyper Transport width.
Configuration options: [4 4 ] [8 8 ] [16 16 ]
Hyper Transport Configuration
SB to K8(CPU) Freq Auto [Disabled]
SB to K8(CPU) Frequency [1000 MHZ]
SB to K8(CPU) LinkWidth [16 16 ]
SouthBridge to K8(CPU)
frequency selection
by CPU capability