Asus M2N-VM DVI - Manual (Page 73)

ASUS M2N-VM DVI 2-27
Command Timing (2T mode) [Auto]
Sets the Command Timing (2T mode).
Configuration options: [Auto] [1T] [2T]
MCT Timing Mode [Auto]
Sets the MCT Timing Mode.
Configuration options: [Auto] [Manual]
Bank Interleaving [Auto]
Allows you to enable the bank memory interleaving.
Configuration options: [Disabled] [Auto]
Enable Clock to All DIMMs [Disabled
Enables or disables clock to all DIMMs.
Configuration options: [Disabled] [Enabled]
MemClk Tristate C3/ALTVID [Disabled]
Enables or disables the MemClk Tristate C3/ALTVID.
Configuration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Enables or disables the memory remapping around memory hole.
Configuration options: [Disabled] [Enabled]