Asus TS500-E2 - Manual (Page 148)

6 - 1 0 6 - 1 0 6 - 1 0 6 - 1 0 6 - 1 0 C h a p t e r 6 : R A I D C o n f i g u r a t i o n C h a p t e r 6 : R A I D C o n f i g u r a t i o n C h a p t e r 6 : R A I D C o n f i g u r a t i o n C h a p t e r 6 : R A I D C o n f i g u r a t i o n C h a p t e r 6 : R A I D C o n f i g u r a t i o n
6.4.4 6.4.4 6.4.4 6.4.4 6.4.4 Creating a RAID 1 set (Mirror) Creating a RAID 1 set (Mirror) Creating a RAID 1 set (Mirror) Creating a RAID 1 set (Mirror) Creating a RAID 1 set (Mirror)
To create a RAID 1 set for Fault Tolerance:
1. Follow steps 1 to 2 of the C r e a t i n g a R A I D 0 s e t C r e a t i n g a R A I D 0 s e t C r e a t i n g a R A I D 0 s e t C r e a t i n g a R A I D 0 s e t C r e a t i n g a R A I D 0 s e t section.
2. Select RAID-1 (Fault Tolerance) RAID-1 (Fault Tolerance) RAID-1 (Fault Tolerance) RAID-1 (Fault Tolerance) RAID-1 (Fault Tolerance)from the Select RAID Type Select RAID Type Select RAID Type Select RAID Type Select RAID Type menu,
then press .
3. Use the arrow keys to select a RAID set member, then press
to mark. An X
X X X X mark appears after the selected HDD.
4. Follow step 3 to select the other members of the RAID set, then press
when finished.
Refer to the M i r r o r i n g R e q u i r e m e n t s M i r r o r i n g R e q u i r e m e n t s M i r r o r i n g R e q u i r e m e n t s M i r r o r i n g R e q u i r e m e n t s M i r r o r i n g R e q u i r e m e n t s note at the bottom of the screen
to determine the number of hard disk drives required for the selected RAID
type.