Asus TS500-E2 - Manual (Page 142)

6 - 4 6 - 4 6 - 4 6 - 4 6 - 4 C h a p t e r 6 : R A I D C o n f i g u r a t i o n C h a p t e r 6 : R A I D C o n f i g u r a t i o n C h a p t e r 6 : R A I D C o n f i g u r a t i o n C h a p t e r 6 : R A I D C o n f i g u r a t i o n C h a p t e r 6 : R A I D C o n f i g u r a t i o n
6.2 Adaptec SCSISelect(TM) Utility
The Adaptec SCSISelect(TM) Utility allows you to create RAID 0, RAID 1, and
RAID 10 set(s) from SCSI hard disk drives connected to the SCSI connector
supported by the embedded Adaptec
® SCSI controller.
To enter the Adaptec SCSISelect(TM) Utility:
1. Turn on the system after installing all the SCSI hard disk drives.
2. During POST, the Adaptec SCSI BIOS automatically detects the installed
SCSI hard disk drives and displays any existing RAID set(s). Press
+ to enter the utility.
3. The utility auto-detects the available SCSI channels. Select the SCSI
channel, then press .