beautypg.com

Configure authentication settings, Change connection settings name – Asus MyPal A716 User Manual

Page 125

background image

Get connected

7-7

Configure authentication settings

A wireless network can be added either when the network is detected, or
manually by entering settings information. To determine if authentication
information is needed, see your network administrator.

To configure authentication settings:

1. To manually enter information, tap

> Settings > Connections tab

> Connections > Network Card > Wireless tab.

2. Tap Add new. If the network was detected, step one and two are not

necessary.

3. To use data encryption, tap Data encryption (WEP enabled).

4. To use Shared Key authentication, tap Network Authentication

(shared mode). You need a network key.

5. To automatically use a network key, tap The key is provided for me

automatically. Otherwise, enter the network key.

6. For increased security, select Use IEEE 802.1x network access

control, then select the appropriate EAP type.

Change connection settings name

Your mobile device is already set up with two sets of connection settings:
My ISP and My Work Network. You can change the name of these
settings to something more familiar. For example, if you put all of your
corporate settings under My Work Network, you can change the name
from My Work Network to your company name.

To change a connection name:

1. Tap

> Settings > Connections tab > Connections.

2. Under My ISP or My Work Network, tap Manage existing

connections.

3. Tap the General tab.

4. Enter a name for the settings.