Asus KFN4-DRE - Manual (Page 83)

ASUS KFN4-DRE 4-25
4.4.4 USB Configuration
The items in this menu allows you to change the USB-related features.
Select an item then press to display the configuration options.
V00.00 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
USB Configuration
USB Devices Enabled:
None
USB Controller Support [USB 1.1+USB 2.0]
Legacy USB Support [Enabled]
USB 2.0 Controller Mode [HiSpeed]
BIOS EHCI Hand-Off [Enabled]
→← Select Screen
↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
The USB Devices Enabled item shows the auto-detected values. If no
USB device is detected, the USB Devices Enabled item shows None.
USB Controller Support [USB 1.1+USB 2.0]
Sets or disables the USB controller support.
Configuration options: [Disabled] [USB 1.1 Only] [USB 1.1+USB 2.0]
Legacy USB Support [Enabled]
Allows you to enable or disable support for legacy USB devices. Setting
to [Auto] allows the system to detect the presence of USB devices at
startup. If detected, the USB controller legacy mode is enabled. If no USB
device is detected, the legacy USB support is disabled.
Configuration options: [Disabled] [Enabled] [Auto]
USB 2.0 Controller Mode [HiSpeed]
Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or
FullSpeed (12 Mbps). Configuration options: [HiSpeed ] [FullSpeed ]
BIOS EHCI Hand-Off [Enabled]
Enables or disables the BIOS EHCI hand-off support.
Configuration options: [Disabled] [Enabled]