Asus MES-B - Manual (Page 18)

18 ASUS MES-B User’s Manual
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
6) LCD Setting (SW2-7)
If you have an LCD monitor connected to your computer, you can enable it with
this switch. NOTE: This setting is available only on motherboards with the
optional Digital Flat Panel (DFP) support.
Setting SW2-7
LCD DIS. [OFF] (default)
LCD EN. [ON]
MES-B LCD Setting
0 1
R
MES-B
Disable Enable
DSW2
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
5) Display Memory Setting (SW2-6)
You can select the display memory allocation mode. When UMA is selected, the
integrated graphics accelerator uses up to 8MB of system memory as display
memory. In Non-UMA mode, display memory is shared with system memory. If
you disable this, the display memory can be up to 8MB SDRAM.
Setting SW2-6
UMA [OFF] (default)
Non-UMA [ON]
0 1
R
MES-B
MES-B Display Memory Setting
Non-UMA UMA
DSW2
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8