Asus MES-B - Manual (Page 34)

34 ASUS MES-B User’s Manual
Connectors
3. H/W SETUP
3. HARDWARE SETUP
15) Audio Jack Header (25-1 pin AUDIOCON)
This header is provided for audio input and output signals. Using a ribbon cable,
you can connect this header to a back panel audio connecotr.
MES-B Audio Jack Header
Line Output (1/8” phono)
Line Input (1/8” phono)
Microphone In (1/8” phono)
Game/MIDI Port (15 pins)
Audio Connector Module
1 2
Red stripe
2
1
26
25
0 1
R
MES-B
16) Wake-On-Ring Connector (2-pin WOR)
This connector connects to an internal modem card with a Wake-On-Ring out-
put. The connector powers up the system when a ringup packet or signal is re-
ceived through the internal modem card. NOTE: For external modems, Wake-
On-Ring is detected through the COM port.
IMPORTANT: This feature requires that PWR Up On Modem Act is set to
Enabled (see 4.5.1 Power Up Control) and that your system has an ATX power
supply with at least 720mA +5V standby power.
MES-B Wake-On-Ring Connector
WOR
0 1
R
MES-B
Pin2 PIXRI#
Pin1 Ground