Asus MES-B - Manual (Page 17)

ASUS MES-B User’s Manual 17
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
3) CPU Core Voltage (VCORE) Setting (SW1-8)
This switch allows you to select the voltage supplied to the CPU.
Setting SW1-8
Normal [OFF] (default)
+0.1V [ON]
MES-B CPU Core Voltage Setting
DSW1
0 1
R
MES-B
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
Normal
(Default)
Add 0.1 Volt
WARNING! Using a higher voltage may help when overclocking but may result
in the shortening of your computer component’s life. It is strongly recommended
that you leave SW1-8 on its default settings.
4) Onboard VGA Setting (SW2-5)
The onboard AGP VGA may be enabled or disabled using this switch. Disable
the onboard VGA if you are using a VGA card on the expansion slot.
Setting SW2-5
Enable [OFF] (default)
Disable [ON]
MES-B Onboard VGA
Disable Enable
(Default)
0 1
R
MES-B
DSW2
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8