Asus M2N-VM DH - Manual (Page 81)

ASUS M2N-VM DH 2-33
2.5.4 Hardware Monitor
The items in this sub-menu displays the hardware monitor values
automatically detected by the BIOS. It also allows you to change CPU Q-Fan
feature-related parameters. Select an item then press to display
the configuration options.
Q-Fan Controller [Disabled]
Allows you to enable or disable the Q-Fan controller.
Configuration options: [Disabled] [Enabled]
CPU Target Temperature, System Target Temperature
Allows you to set the CPU and system target temperature. Key in to input
the value, then press .
CPU Temperature, System Temperature
The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. These items are not user-configurable.
CPU Fan Speed [xxxxRPM]
Chassis Fan Speed [xxxxRPM]
Power Fan Speed [xxxxRPM]
The onboard hardware monitor automatically detects and displays the CPU,
Chassis, and chip fan speeds in rotations per minute (RPM). If any of the
fans is not connected to the motherboard, the field shows 0. These items
are not user-configurable.
CPU Fan Speed warning [800 RPM]
Sets the CPU fan speed warning feature.
Configuration options: [Disabled] [800RPM] [1200RPM] [1600RPM]
Select Menu
Item Specific Help
Press [Enter] to
enable or disable
Hardware Monitor
Q-Fan Controller [ Disabled ]
CPU Target Temperature [60C/140F]
System Target Temperature [60C/140F]
CPU Temperature 48ºC
System Temperature 41ºC
CPU Fan Speed 3068 RPM
Chassis Fan Speed 0 RPM
Power Fan Speed 0 RPM
Vcore [1.56V]
Vcc 12V [11.58V]
Phoenix-Award BIOS CMOS Setup Utility
Power
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select SubMenu
Vcc 3.3V [3.18V]
Vxx 5.0V [5.05V]
CPU Fan Type [Auto]
CPU Fan Speed warning [800 RPM]