Asus M2N-VM DH - Manual (Page 76)

2-28 Chapter 2: BIOS setup
SATA Port 1, 2 [Enabled]
Allows you to disable or set the SATA 1 and 2 ports.
Configuration options: [Disabled] [SATA-1] [SATA-1+2]
RAID Enabled [Disabled]
Enables or disables the onboard RAID controller. When set to
[Enabled], the succeeding items become user-configurable.
Configuration options: [Disabled] [Enabled]
IDE DMA transfer access [Enabled]
Allows you to enable or disable the IDE DMA transfer access.
Configuration options: [Disabled] [Enabled]
IDE Prefetch Mode [Enabled]
Allows you to enable or disable the IDE PIO read prefetch mode.
Configuration options: [Disabled] [Enabled]
SATA1/2/3/4 RAID [Disabled]
Enables or disables the RAID function of the SATA1/2
primary/secondary master drives. Configuration options: [Disabled]
[Enabled]
JMicron RAID Controller [IDE]
Allows you to set the JMicron RAID controller mode.
Configuration options: [IDE] [AHCI] [RAID] [Disabled]
Onboard 1394 Controller [Enabled]
Allows you to disable or enable the onboard 1394 device support.
Configuration options: [Disabled] [Enabled]
Primary Display Adapter [PCIE Slot]
Allows you to select the graphics controller to use as the primary boot
device. Configuration options: [PCI Slot] [PCIE Slot] [Onboard VGA]
Select Menu
Item Specific Help
Disable/Enable OnChip
IDE Channel0
Phoenix-Award BIOS CMOS Setup Utility
Advanced
Serial-ATA Configuration
This sub-menu contains IDE function-related items. Select an item then
press to edit.
Serial-ATA Configuration
SATA Port 1,2 [ SATA-1+2 ]
RAID Enabled [Disabled]
x SATA 1 RAID Disabled
x SATA 1 RAID Disabled
x SATA 2 RAID Disabled
x SATA 2 RAID Disabled