3 installing a dimm, 4 removing a dimm – Asus M2N-VM DH User Manual

Page 29

ASUS M2N-VM DH

1-19

1.7.3 Installing a DIMM

1. Unlock a DIMM socket by

pressing the retaining clips

outward.

2. Align a DIMM on the socket

such that the notch on the

DIMM matches the break on the

socket.

3. Firmly insert the DIMM into the

socket until the retaining clips

snap back in place and the DIMM

is properly seated.

Make sure to unplug the power supply before adding or removing DIMMs

or other system components. Failure to do so may cause severe damage

to both the motherboard and the components.

Unlocked retaining clip

DDR2 DIMM notch

1.7.4 Removing a DIMM

To remove a DIMM:

1. Simultaneously press the

retaining clips outward to unlock

the DIMM.

2. Remove the DIMM from the socket.

Support the DIMM lightly with your fingers when pressing the retaining

clips. The DIMM might get damaged when it flips out with extra force.

DDR2 DIMM notch

• A DDR2 DIMM is keyed with a notch so that it fits in only one

direction. DO NOT force a DIMM into a socket to avoid damaging the

DIMM.

• The DDR2 DIMM sockets do not support DDR DIMMs. Do not install

DDR DIMMs to the DDR2 DIMM sockets.