Asus M2N-VM DH - Manual (Page 80)

2-32 Chapter 2: BIOS setup
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this
item is set to Enabled, the items Date of Month Alarm and Time (hh:mm:ss)
Alarm items become user-configurable with set values.
Configuration options: [Disabled] [Enabled]
Date of Month Alarm [Disabled]
To set the date of alarm, highlight this item and press to
display the Date of Month Alarm pop-up menu. Key-in a value within
the specified range then press . Configuration options:
[Min=0] [Max=31]
Alarm Time (hh:mm) [Disabled]
To set the time of alarm:
1. Highlight this item and press to display a pop-up menu
for the hour field.
2. Key-in a value (Min=0, Max=23), then press .
3. Press to move to the minutes field then press .
4. Key-in a minute value (Min=0, Max=59), then press .
5. Press to move to the seconds field then press .
6. Key-in a value (Min=0, Max=59), then press .
Power Up By PS/2 Keyboard [Disabled]
Allows you to use specific keys on the keyboard to turn on the system.
This feature requires an ATX power supply that provides at least 1A on
the +5VSB lead. Configuration options: [Disabled] [Space Bar] [Ctrl-Esc]
[Power Key] [Any Key]
Power On By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse
to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead. Configuration options: [Disabled]
[Enabled]
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the
first try. Turning an external modem off and then back on while the
computer is off causes an initialization string that turns the system
power on.