24 chapter 1: product introduction, M2n-vm dh usb device wake up, Usbpw12 – Asus M2N-VM DH User Manual
Page 34: Usbpw34, Usbpw56
1-24
Chapter 1: Product introduction
2. USB device wake-up (3-pin USBPW12, USBPW34, USBPW56,
USBPW78, USBPW910)
Set these jumpers to +5V to wake up the computer from S1 sleep
mode (CPU stopped, DRAM refreshed, system running in low power
mode) using the connected USB devices. Set to +5VSB to wake up
from S3 and S4 sleep modes.
The USBPW12 and USBPW34 jumpers are for the rear USB ports. The
USBPW56 is for the WiFi-AP module. The USBPW78 and USBPW910
jumpers are for the internal USB connectors that you can connect to
additional USB ports.
• The USB device wake-up feature requires a power supply that can
provide 500mA on the +5VSB lead for each USB port; otherwise,
the system will not power up.
• The total current consumed must NOT exceed the power supply
capability (+5VSB) whether under normal condition or in sleep mode.
R
M2N-VM DH
M2N-VM DH USB Device Wake Up
3
2
2
1
USBPW12
+5V
(Default)
+5VSB
6
4
4
2
5
3
3
1
USBPW34
USBPW34
USBPW12
USBPW56
USBPW78
USBPW910
USBPW56
+5V
(Default)
(Default)
+5VSB
6
4
4
2
+5V
(Default)
+5VSB
5
3
3
1
+5V
(Default)
+5VSB
+5V
+5VSB
USBPW78
USBPW910