beautypg.com

Chapter 3, 4 usb configuration – Asus M4A89GTD PRO/USB3 User Manual

Page 87

background image

ASUS M4A89GTD PRO Series

3-27

Chapter 3

HD Audio Azalia Device [Enabled]

Allows you to enable or disable the HD Audio controller.

Configuration options: [Auto] [Disabled] [Enabled]

The following three items appear only when you set the HD Audio Azalia Device item to

[Enabled] or [Auto].

Front Panel Type [HD]

Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high-

definition audio depending on the audio standard that the front panel audio module supports.
[AC 97]

Sets the front panel audio connector (AAFP) mode to legacy AC’97

[HD]

Sets the front panel audio connector (AAFP) mode to high definition audio.

SPDIF OUT Type [SPDIF]

If your graphics card has HDMI output and needs to use SPDIF signal from the SPDIF_Out

header, you need to set to HDMI for HDMI audio output.
[SPDIF]

Sets to [SPDIF Output] for SPDIF audio output.

[HDMI]

Sets to [HDMI Output] for HDMI audio output.

On Board ATA Controller [Enabled]

[Enabled]

Enables the onboard ATA controller.

[Disabled]

Disables the controller.

On Board ATA Controller ROM [Enabled]

This item appears only when you set the previous item to [Enabled].
[Enabled] Enables the onboard ATA controller ROM.
[Disabled] Disables the onboard ATA controller ROM.

Onboard USB 3.0 Controller [Enabled] (M4A89GTD PRO/USB3 model only)

[Enabled]

Enables the USB 3.0 controller.

[Disabled]

Disables the controller.

3.6.4

USB Configuration

The items in this menu allow you to change the USB-related features. Select an item and

press �Enter�� to display the configuration options.

USB Configuration

Module Version - 2.24.5-13.4

USB Devices Enabled:

2 Hubs

USB Support

[Enabled]

Legacy USB Support

[Auto]

USB 2.0 Controller Mode

[HiSpeed]

BIOS EHCI Hand-Off

[Enabled]

BIOS SETUP UTILITY

Advanced

This manual is related to the following products: