Chapter 3, Updating the bios file – Asus M4A89GTD PRO/USB3 User Manual
Page 68

3-8
Chapter 3: BIOS setup
Chapter 3
4.
Select Yes and press
Updater. Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
•
For BIOS Updater version 1.04 or later, the utility automatically exits to the DOS
prompt after updating BIOS.
•
Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Setup Defaults item under the Exit BIOS menu. See Chaper 3 of
your motherboard user manual for details.
•
Ensure to connect all SATA hard disk drives after updating the BIOS file if you have
disconnected them.
Updating the BIOS file
To update the BIOS file using BIOS Updater
1.
At the FreeDOS prompt, type bupdater /pc /g and press
ASUSTek BIOS Updater for DOS V1.00b [09/06/22]
Current ROM
Update ROM
A:
Note
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [Esc] Exit
M4A89GTD.ROM 2097152 2010-01-11 17:30:48
FLASH TYPE:
MXIC 25L1605A
PATH:
A:\
BOARD:
M4A89GTD PRO Series
VER:
0109
DATE:
01/07/2010
BOARD:
Unknown
VER:
Unknown
DATE:
Unknown
D:\>bupdater /pc /g
2.
The BIOS Updater screen appears as below.
3.
Press �Tab�� to switch between screen fields and use the �Up/Down/Home/End�� keys
to select the BIOS file and press �Enter��. BIOS Updater checks the selected BIOS file
and prompts you to confirm BIOS update.
Are you sure to update BIOS?
Yes
No