Asus M4A89GTD PRO/USB3 - Manual (Page 75)

ASUS M4A89GTD PRO Series 3-15
Chapter 3
3.5 Ai Tweaker menu
The Ai Tweaker menu items allow you to configure overclocking-related items.
Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field
values can cause the system to malfunction.
The configuration options for this chapter vary depending on the CPU and DIMM model you
installed on the motherboard.
Scroll down to display the following items:
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
BIOS SETUP UTILITY
Main Ai Tweaker Advanced Power Boot Tools Exit
Warning: this function
belongs to overclock-
ing, and it may cause
instability.
Select a CPU level,
and the rest will be
auto-adjusted. If you
want to adjust more,
set Ai Overclock Tuner
to Manual after you
select a CPU level.
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Configure System Performance Settings
CPU Level UP [Auto]
-------------------------------------------------
OC Tuner Utility
Ai Overclock Tuner [Auto]
CPU Ratio [Auto]
DRAM Frequency [Auto]
CPU/NB Frequency [Auto]
HT Link Speed [Auto]
DRAM Timing Configuration
DRAM Driving Configuration
******* Please key in numbers directly! *******
CPU & NB Voltage Mode [Offset]
CPU Offset Voltage 1.308 [Auto]
CPU/NB Offset Voltage 1.100 [Auto] [Auto]
CPU VDDA Voltage 2.490 [Auto]
DRAM Voltage 1.500 [Auto]
HT Voltage 1.196 [Auto]
NB Voltage 1.093 [Auto]
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
NB 1.8V Voltage 1.950 [Auto]
SB Voltage 1.100 [Auto]
SidePort Memory Voltage 1.500 [Auto]
***********************************************
CPU Load-Line Calibration [Auto]
CPU/NB Load-Line Calibration [Auto]
CPU Spread Spectrum [Auto]
PCIE Spread Spectrum [Auto]
************** GFX Overclocking ***************
Internal Graphics Mode [UMA+SIDEPORT]
UMA Frame Buffer Size [Auto]
SIDEPORT Clock Speed [DDR3-1333MHz]
GFX Engine Clock Override [Disabled]
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
3.5.1 CPU Level UP [Auto]
Allows you to select a CPU level, and the related parameters will be automatically adjusted
according to the selected CPU level. If you want to manually configure the settings in detail,
set Ai Overclock Tuner to [Manual] after selecting a CPU level.
Configuration options: [Auto] [Phenom II-955] [Phenom II-3.4G] [Phenom II-3.6G]
• The configuration options vary depending on the CPU model you install on the
motherboard.
• The CPU Level UP function support depends on CPU types.