Asus MAXIMUS VI FORMULA - Manual (Page 167)

ASUS MAXIMUS VI FORMULA 4-15
Chapter 4
Using the Wake-on-LAN
If you want to wake up your computer using the smart device, ensure that you enable the
computer’s Wake-on-LAN settings. To configure your computer’s Wake-on-LAN settings:
1.
From BIOS Setup, go to Advanced > APM then set Power On By PCIE/PCI item to
[Enabled].
2. From Windows ® OS, do the following:
a. On your desktop, click Start, right-click Computer > Manage to launch the
Computer Management screen.
b. Click Device Manager to view all the installed devices.
c. Click Network Adapters, right-click the installed module card (Broadcom or
Atheros) then click Properties > Power Management tab.
d. Tick these items Allow this device to wake up the computer and Only allow a
magic packet to wake the computer.
For 802.11ac standard MPCIe Combo II card with Wi-Fi module driver, the Wake-on-LAN
function will be supported in the later version for Windows ® 8 operating system.
Wi-Fi GO functions
• Cloud GO!: Allows you to remotely control and sync your files across multiple cloud
services such as ASUS WebStorage, GoogleDrive™, and DropBox ® .
• Remote Desktop: Allows you to remotely control your desktop in real time using your
smart device.
• DLNA Media Hub: Allows you to stream media files to a DLNA-supported device and
remotely control playback using your smart device.
• File Transfer: Allows you to transfer files between your computer and your smart
device.
• Smart Sensor Control: Allows you to remotely control your desktop by using your
smart device’s built-in sensors.
• Remote Keyboard & Mouse: Allows you to use your smart device’s touch panel as a
remote keyboard and mouse for your computer.
•. Capture & Send: Allows you to take screenshots and send them to a smart device.