Asus MAXIMUS VI FORMULA - Manual (Page 200)

5-4 Chapter 5: RAID support
Chapter 5
Creating a RAID set
To create a RAID set:
1.
From the utility main menu, select 1. Create RAID Volume and press . The
following screen appears:
2. Enter a name for the RAID set and press .
3. When the RAID Level item is selected, press the up/down arrow key to select a RAID
level to create, and then press .
4. When the Disks item is selected, press to select the hard disk drives you want
to include in the RAID set. The SELECT DISKS screen appears:
[ CREATE VOLUME MENU ]
[ HELP ]
Enter a unique volume name that has no special characters and is
16 characters or less.
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
Create volume
Intel(R) Rapid Storage Technology - Option ROM - v10.5.1.1070
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
[ ↑↓]-Select [ESC]-Exit [ENTER]-Select Menu
Volume0
[ SELECT DISKS ]
Port Drive Model Serial # Size Status
0 ST3160812AS 9LS0HJA4 149.0GB Non-RAID Disk
1 ST3160812AS 9LS0F4HL 149.0GB Non-RAID Disk
2 ST3160812AS 3LS0JYL8 149.0GB Non-RAID Disk
3 ST3160812AS 9LS0BJ5H 149.0GB Non-RAID Disk
Select 2 to 6 disks to use in creating the volume.
[ ↑↓]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done