Asus RS120-E5/S - Manual (Page 34)

Chapter 2: Hardware setup 2-16
2.5.3 Replacing the optional riser card
The optional PCIX-E8-R10 riser card offers a better system expansion ability and
enables the system to install different add-in cards.
To replace the optional PCIX-E8-R10 riser card for RS120-E5:
1. Firmly hold the riser card bracket, then pull it up to detach it from the PCI
Express slot on the motherboard.
2. Unscrew the original riser card to remove it from the card bracket and set it
aside.
3. Align the screw holes on thePCIX-E8-R10 riser card with the ones on the
card bracket.
4. Fasten the riser card to the bracket with screws.
5. Follow the previous sections to install your expansion cards and reinstall the
card bracket back to the system.