Asus RS120-E5/S - Manual (Page 30)

Chapter 2: Hardware setup 2-12
5. Carefully insert the drive tray and
push it all the way to the depth of
the bay until a small fraction of the
tray edge protrudes.
6. Push the tray lever until it clicks,
and secures the drive tray in place.
The drive tray is correctly placed
when its front edge aligns with the
bay edge.
7. Repeat steps 1 to 6 if you wish to
install a second SATA drive.
When installed, the SATA connector on the drive connects to the SATA interface
on the backplane.
8. Connect the bundled SATA cables to the connectors on the SAS backplane.
Refer to section 2.7 SAS backplane cabling for information on the SAS
backplane cable connections.