3 installing the top cover, Installing the top cover -4 – Asus RS120-E5/S User Manual

Page 22

Chapter 2: Hardware setup

2-4

2. Firmly hold the cover and slide it

toward the rear panel for about half

an inch until it is disengaged from

the chassis.

5. Lift the cover from the chassis.

2.1.3

Installing the top cover

1. Position the cover on top of the chassis with the thumbscrews on the rear,

and leave a gap of about half an inch from the front panel.

2. Make sure that the pegs on the cover (two on each side) are aligned to the

grooves on the chassis.

3. Slide the cover toward the front until it snaps in place.
4. Tighten the thumbscrews on the rear to secure the cover.

1/2 inch

distance

Pegs inside

Grooves

Thumbscrews