Asus V9280 Series - Manual (Page 13)

13 ASUS V9280 Series User’s Manual
2. Hardware Setup
Operating System Requirements
NOTE: This graphics card requires a motherboard with an AGP slot.
Windows 98
Windows 98 supports full Direct3D and AGP features. If you are using a beta version
of Windows 98 and you want to fully take advantage the Direct3D and AGP features,
you must upgrade it to the release version before installing the AGP
display driver.
Windows 98 includes VGARTD for the major chipsets but it is recommended that
you install VGARTD from the ASUS support CD to make sure that you have the
latest version of VGARTD (see 3. Software Setup | Install GART Driver).
NOTES
• VGARTD stands for Virtual Graphics Address Remapping Table Driver, which
is necessary to use the DIME feature of AGP. DIME means Direct Memory
Execute, which is accessed directly by most AGP chips (when VGARTD is
installed) for complex texture-mapping operations.
• For other notes or release information, see the README files in the
installation CD disc.
• This Manual assumes that your CD-ROM disc drive is drive D: and that
Windows is in C:\WINDOWS. Replace either with the actual location, if
necessary.
IMPORTANT!
• To avoid damage to your graphics card, unplug your computer’s power
supply before inserting your graphics card into the AGP slot.
• Make sure that the power supply of your motherboard can provide enough
electrical current on the 3.3V lead to maintain normal operation.
• Windows 98 and VIA Systems: If your motherboard has a VIA-based
chipset, the VIA VGARTD must be installed in normal mode.
2
. H/W
Setup
Requirements