Asus P4SE/U2 - Manual (Page 51)

ASUS P4SE Motherboard 2-17
Slot 1/5, Slot 2/6, Slot 3, Slot 4 IRQ [Auto]
These fields assign the IRQ for each PCI slot. The default setting for each
field is [Auto], which utilizes auto-routing to determine IRQ assignments.
Configuration options: [Auto] [NA] [3] [4] [5] [7] [9] [10] [11] [12] [14] [15]
PCI/VGA Palette Snoop [Disabled]
Some non-standard VGA cards, like graphics accelerators or MPEG video
cards, may not show colors properly. Setting this field to [Enabled] corrects
this problem. If you are using standard VGA cards, leave this field to the
default setting [Disabled]. Configuration options: [Disabled] [Enabled]
PCI Latency Timer [32]
Leave this field to the default setting [32] for best performance and
stability.
Primary VGA BIOS [PCI VGA Card]
This field allows you to select the primary graphics card or the onboard
VGA. The option [Onboard VGA] appears only if you installed a PCI or
AGP card. Configuration options: [PCI VGA Card] [AGP VGA Card]
USB Function [Enabled]
This field allows you to select the number of USB 1.1 controllers that you
wish to activate. Configuration options: [Disabled] [Enabled]
2.4.3 PCI Configuration
Onboard Game Port [200H-207H]
This field allows you to select the I/O address for the game port.
Configuration options: [Disabled] [200H-207H] [208H-20FH]
Onboard MIDI I/O [Disabled]
This field allows you to select the I/O address for the MIDI port.
Configuration options: [Disabled] [330H-331H] [300H-301H]