A.3 troubleshooting – Asus ASMB3-iKVM User Manual
Page 62

A-4
Appendix: Reference information
A.3
Troubleshooting
Problem
Solution
The local/central server cannot connect
to the ASMB3-IKVM board
1. Check if the LAN cable is connected
to the IKVM LAN port. See
section A.1 LAN port for server
management for details.
2. Make sure that the IP address of
both the remote and local/central
servers are on the same subnet.
(See chapter 2 for details.) Try “ping
central server and make sure romete
server could reply the ping request.
3. Check if the IP source is set to [DHCP].
When set to [DHCP], you’ll not be able
to configure the IP address.
The cursor on the remote server
console screen (refer to the screenshot
on section 3.1.3) shows duplicates or
becomes abnormal
1. Check if the mouse setting is correct.
Select different USB mouse type
in drop-down menu for different
operating sytems. See section 3.1.7
KVM Settings for details.
2. Click Options in the remote server
console screen. From the pop-up
menu, click Local Cursor, and then
select Transparent or default.
3. Click Synchronize mouse in the
remote server console screen. (Only
for Linux operating system)
Cannot use Virtual Media to share the
data stored in the CD-ROM image with
the users in the remote server.
Check if you’ve installed NWLink
IPX/SPX/NetBIOS compatible Transport
Protocol item for the network. If no, follow
below instruction to install the item.
1. Right-click the Network Connections
icon on the Windows
®
taskbar, and then
select Open Network Connections.
2. Right-click Local Area Connection,
and then select Properties.
3. Click Install button, the Select Network
Connection Type screen appears.
4. Select Protocol, and then click Add....
5. Select NWLink IPX/SPX/NetBIOS
compatible Transport Protocol, and
then click OK to install.
This troubleshooting guide provides answers to some common problems that you
may encounter while installing and/or using ASUS ASMB3-IKVM. These problems
require simple troubleshooting that you can perform by yourself. Contact the
Technical Support if you encounter problems not mentioned in this section.