Asus ASMB3-iKVM - Manual (Page 30)

2-14 Chapter 2: Installation
KIRARARI Help Menu options
Options Description
kirarari reset Reset the device for BMC card
kirarari fw Show firmware information
kirarari fw upgrade <> Upgrade BMC firmware
kirarari ip Show IP setting
kirarari ip set xxx.xxx.xxx.xxx Set IP to xxx.xxx.xxx.xxx
kirarari gw Show gateway setting
kirarari gw set xxx.xxx.xxx.xxx Set gateway to xxx.xxx.xxx.xxx
kirarari netmask Show net-mask setting
kirarari netmask set xxx.xxx.xxx.xxx Set net-mask to xxx.xxx.xxx.xxx
kirarari mac Show MAC setting
kirarari mac set xxx.xxx.xxx.xxx Set MAC to xxx.xxx.xxx.xxx
kirarari ipsrc Show IP source setting
kirarari ipsrc set <> Set the IP source from static (no change)/
bios (assign by bios setting)/dhcp (get IP
from DHCP server)
kirarari admin Show administrator name
kirarari admin name xxxxx Set login name of administrator to xxxxx
kirarari admin passwd xxxxx Set login password of administrator to xxxxx
2.5.1 Updating the ASMB3-IKVM firmware
You may use KIRARARI utility to update the ASMB3-IKVM firmware.
To update the firmware:
1. Download the latest ASMB3-IKVM firmware from the ASUS website
(www.asus.com), and then save the file.
Save the file in a USB flash or in the hard disk drive of the remote server.
2. Follow steps 1-6 on previous page.
3. At the prompt, type kirarari fw upgrade rs100e51.bin, then press
to start updating the firmware.*
4. When the update process is complete, the following screen appears.
C:\ASMB3\IKVM\MODEL\RS100-E5\PI2>kirarari fw upgrade rs100e51.bin
Starting Firmware Upgrade
Uploading Firmware File
0% ------------------- 50% ------------------ 100%
********************************************************
Upload complete.
Flashing Firmware (takes about 1min)
Successfully upgraded firmware.
C:\ASMB3\IKVM\MODEL\RS100-E5\PI2>