Asus P5-99B - Manual (Page 40)

III. HARDWARE SETUP
ASUS P5-99B User’s Manual 40
Connectors
III. H/W SETUP
25. VGA Header (16-pin VGA)
The VGA Header lets you use the onboard AGP VGA and connect a standard
(CRT) monitor through the provided VGA cable with mounting bracket. Con-
nect the cable to this header and mount the bracket to the case on a free expan-
sion slot. You can make available the VGA port by setting DIP 1 – Switch 2 to
Enable (
OFF ).
0 1
Bracket to end approximately 6inch
Orient the red stripe on the
monitor cable with pin 1
TIP: You may also remove the bracket
connector and mount them directly to
the case to save expansion slot space.
P5-99B VGA Header
16
1 9
8