Asus P5-99B - Manual (Page 22)

III. HARDWARE SETUP
ASUS P5-99B User’s Manual 22
Motherboard Settings
III. H/W SETUP
Compatible Cyrix CPU Identification
The only Cyrix 6x86-PR166+ CPU that is supported on this
motherboard must be Revision 2.7 or later. Look on the un-
derside of the CPU for the serial number. The number should
read G8DC6620A or later.
9. Voltage Regulator Output Selection (DIP 1 – Switches 6, 7, 8, 9, 10)
These jumpers set the VCORE voltage supplied to the CPU. Switching regula-
tors allow some settings to be the same for two voltages of different power
planes.
WARNING! Because CPU designs change rapidly, the table on the following
page is only intended as a simple guideline and thus may not be true for your
CPU. Always refer to the CPU documentation for your CPU’s voltage and then
set the appropriate VID jumpers according to the CPU Vcore Voltage Selection
illustration.
0 1
P5-99B CPU
Core Voltage (VCORE) Selection
DIP 1
3.5Volts
ON
1 2 3 4 5 6 7 8 9 10
2.2Volts
ON
1 2 3 4 5 6 7 8 9 10
2.1Volts
ON
1 2 3 4 5 6 7 8 9 10
Inhibit
ON
1 2 3 4 5 6 7 8 9 10
2.3Volts
ON
1 2 3 4 5 6 7 8 9 10
2.4Volts
ON
1 2 3 4 5 6 7 8 9 10
2.5Volts
ON
1 2 3 4 5 6 7 8 9 10
2.8Volts
ON
1 2 3 4 5 6 7 8 9 10
2.6Volts
ON
1 2 3 4 5 6 7 8 9 10
2.7Volts
ON
1 2 3 4 5 6 7 8 9 10
2.9Volts
ON
1 2 3 4 5 6 7 8 9 10
3.0Volts
ON
1 2 3 4 5 6 7 8 9 10
3.1Volts
ON
1 2 3 4 5 6 7 8 9 10
3.2Volts
ON
1 2 3 4 5 6 7 8 9 10
3.3Volts
ON
1 2 3 4 5 6 7 8 9 10
3.4Volts
ON
1 2 3 4 5 6 7 8 9 10