Hardware setup, 14 scsi termination, 15 smbus connector – Asus AP2300 User Manual

Page 34

Text mode
Original mode

4. Hardware Setup

4. Hardware Setup

AP2300 Hardware Reference Guide

• 4-14 SCSI Termination

Terminating the SCSI bus “chain” is necessary for SCSI devices to work
properly. If the last device on the SCSI bus chain does not have termina-
tion jumpers, you must terminate it using a male or female terminator as
illustrated below.

Female Terminator for SCSI cable

Male Terminator for SCSI Backplane

SCSI

Termination / SMB

• 4-15 SMBus Connector

To use SMBus devices, connect the motherboard’s SMBus connector to
the SMB In connector on the DA-BP5E SCSI backplane board. Another
SMBus device can be connected to the SMB Out connector on the backplane
board.

SMBus Connector

CUR-DLS Motherboard

DA-BP5E SCSI

Backplane Board

SMB In

SMB Out

SMBDATA

SMBCLK

GND