Asus M2N-VM DVI - Manual (Page 79)

ASUS M2N-VM DVI 2-33
IRQ-xx assigned to [PCI Device]
When set to [PCI Device], the specific IRQ is free for use of PCI�PnP devices.
When set to [Reserved], the IRQ is reserved for legacy ISA devices.
Configuration options: [PCI Device] [Reserved]
USB 1.1 Controller [Enabled]
Enables or disables the USB 1.1 Controller.
Configuration options: [Disabled] [Enabled]
USB 2.0 Controller [Enabled]
Enables or disables the USB 2.0 Controller.
Configuration options: [Disabled] [Enabled]
Legacy USB Support [Enabled]
Allows you to enable or disable support for USB devices on legacy operating
systems (OS). Setting to Auto allows the system to detect the presence of USB
devices at startup. If detected, the USB controller legacy mode is enabled. If no
USB device is detected, the legacy USB support is disabled.
Configuration options: [Disabled] [Enabled] [Auto]
The Module Version and USB Devices Enabled items show the
auto-detected values. If no USB device is detected, the item shows None.
2.4.6 USB Configuration
The items in this menu allows you to change the USB-related features. Select an
item then press to display the configuration options.
USB Configuration
Module Version - 2.24.1-13.4
USB Devices Enabled:
1 Drive
USB 1.1 Controller [Enabled]
USB 2.0 Controller [Enabled]
Legacy USB Support [Auto]
USB 2.0 Controller Mode [HiSpeed]
BIOS EHCI Hand-Off [Enabled]
USB Mass Storage Device Configuration
Options
Enable
Disable
E3608_M2N-VM-DVI.indb 22 12/27/07 4:40:05 PM