Setting up routing protocol - rip – Asus DSL-N13 User Manual

Page 44

Text mode
Original mode

DSL-N13 Wireless ADSL 2/2+ Modem Router User Manual

Setting up routing protocol - RIP

RIP stands for Rounting Information Protocol. DSL-N13 supports RIPv1 and RIPv2.
1. Click Advanced Setup -> Routing -> RIP to open the configuration page.

2. To activate RIP, select Enabled radio button for global RIP mode.
3. To configure an individual interface, select the desired RIP version and operation

and check the Enabled checkbox for the interface.

4. Press Save/Apply to save and activate the settings.