Asus P5N73-AM - Manual (Page 58)

2-22 Chapter 2: BIOS information
2. Press any key to continue. The password field setting is changed to Clear.
A note about passwords
The Supervisor password is required to enter the BIOS Setup program preventing
unauthorized access. The User password is required to boot the system preventing
unauthorized use.
Forgot your password?
If you forget your password, you can clear it by erasing the CMOS Real Time Clock
(RTC) RAM. The RAM data containing the password information is powered by the
onboard button cell battery. If you need to erase the CMOS RAM, refer to section 1.9
Jumper for instructions.
Password Check
This field requires you to enter the password before entering the BIOS setup or the system.
Select [Setup] to require the password before entering the BIOS Setup. Select [System] to
require the password before entering the system.
Configuration options: [Setup] [System]
2.7 Tools menu
The Tools menu items allow you to configure options for special functions. Select an item
then press to display the submenu.
Phoenix-Award BIOS CMOS Setup Utility
Main Advanced Power Boot Tools Exit
Select Menu
Item Specific Help
Press [Enter] to Run
ASUS EX Flash 2
ASUS EZ Flash 2
ASUS EZ Flash 2
Allows you to run ASUS EZ Flash 2. When you press , a confirmation message
appears. Use the left/right arrow key to select between [Yes] or [No], then press to
confirm your choice. Please see page 2-3, section 2.1.3 for details.
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select SubMenu F10: Save and Exit